Features & Benefits:
- Install applications: T-bar ceiling
- 10 year Limited Warranty
- Save 30-70% compared to gas, propane, oil or other electric systems
- Hard wired to 120, 208, 240 or 277 volts.
- NOTE: Does not plug into a 120-volt electrical outlet.
- Controlled with hard wired line voltage or low voltage thermostat
- Reaches full heating potential in 5 to 7 minutes
Ceramicircuit Heat Comparison
The Ceramicircuit warms a room faster and can reach higher temperatures than other radiant T-Bar ceiling heaters on the market. It also heats a greater amount of surface area than the compared heater. Look below for a thermal comparison between Ceramicircuit and a competing brand’s lay-in heater.
Once the room is heated to the desired temperature Ceramicircuit turns off. After being turned off for five minutes, Cermicircuit’s surface temperature is higher than the compared heater’s surface temperature which had operated continuously for ten minutes. See the comparison below:
Yoga Studio Application
In this example, a 760 square foot yoga studio is heated by 15 625 watt Ceramicircuit heating panels. The panels fit directly into a t-bar ceiling grid, commonly used in commercial spaces. They will warm up and heat the people and objects in the studio below to a temperature of 100-105 degrees Fahrenheit.
Note on insulation:
It’s important to note that any heating system will preform best when used in a properly insulated space. To learn more about how to insulate and calculate how much you could save by upgrading your insulation click the button below.
CeramiCircuit Lay-in Specifications
|24”x 24”x 1.25″||625||5.2||2134||120|
|24”x 24”x 1.25″||625||3.0||2134||208|
|24”x 24”x 1.25″||625||2.6||2134||240|
|24”x 24”x 1.25″||625||2.3||2134||277|